35LT electric water heater with 5 years warranty


102,99 € 102,99 € tax incl.

Water heater - Water heater - Boiler - 30LT

Electric water heater model V / 2 30 liters. 220 v.

Exclusive accumulation electric water heater with new design vidron protection
capacity 75 l, power 1.2 kW, vertical wall

- Boiler in steel treated with thermosetting resins (Teflon) or glass-coated with flow-coating method (850 ° C)

Electric water heaters are used for the production and storage of hot water for the water mains.

Their operating principle is very simple, as it is based on the use of an electrical resistance which, by heating thanks to the passage of the current, supplies the necessary heat to the water.

A first distinction can be made precisely on the basis of the resistance, which can be immersed, ie directly in contact with the water to be heated,

- The heating element is activated by an adjustment thermostat, which allows the water temperature in the tank to be set and kept constant.

- Depending on the type of installation, the water heaters are divided into vertical murals, horizontal murals and base units, when they are installed resting on the ground. The capacities of MTS products range from 10 to 500 liters: the floor models are those with the highest capacity, generally intended for collective or industrial use. Some of the smaller wall models also exist in the under-sink version: they have fittings for connecting hot and cold water pipes in the upper part, rather than lower, and must therefore be installed on the wall but close to the ground. Finally, some wall models are multi-position: they can be installed indifferently in a horizontal or vertical position.
- Very important is the treatment of the internal surface of the product, according to which the water heater has several guarantee periods. Furthermore, to protect this surface from corrosion, there is a magnesium rod, which acts as an anode and must be periodically replaced.
- Eventually, the water heaters can house a coil in them (thermoelectric models or thermo-mixers) in which to run the water produced by a gas boiler (similar to what happens in the boilers), with the purpose of integrating with a source additional the heat transferred to the sanitary water.

- In order to minimize heat dissipation, between the outer shell of the water heater, made of painted sheet metal, and the tank, there is a thick layer of high-density polyurethane foam or polystyrene insulation

Main technical data
- capacity l 75
- power kW 1.2
- single-phase 230 V voltage
- thermal dispersion at 65 ° c kWh / 24h 1.22
- net weight kg 14.3
- Dimensions 450 x 554 mm
- 5 years warranty

Feedaty Reviews (0)

There are no reviews