3M 2800W 230V 16A Din Rail Electric Timer Clock Switch

It is used to program the automatic switching on and off of an electrical load according to pre-set times over a 24-hour period. Once set, the cycle repeats identically every day. 2. Technical Features "Scrambler" Programming: It works via a rotating disc with small sliders (sliders). By moving them outward or inward, you decide when the circuit should be closed (ON) or open (OFF). Minimum Interval: Typically, each slider represents 15 or 30 minutes of time. Power Reserve: This model is usually equipped with an internal battery. In the event of a power failure (blackout), the clock continues to run, avoiding having to reset the correct time when power is restored. Manual Selector: It has a 3-position switch: Always ON: The load is always active. AUTO: Follows the programming set with the sliders. Always OFF: The load is always off.
Common Applications (Industrial and Residential Use) Being an "industrial" product, it is built to handle heavy loads or operate in complex electrical panels. It is used for: Lighting: Illuminated signs, shop windows, outdoor lights, or driveways. Heating/Cooling: Activation of boilers, heat pumps, or fans at specific times. Irrigation: Automatic management of garden or landscaping pumps. Swimming pools: Timing of filter pumps. Industrial automation: Machinery that requires a preheating cycle before the start of the work shift.

- Modules 3
- Maximum load 16A 2800w
- Power supply 230V
- Absorption 1A
- Battery life 200 hours 230v - 100a 110v
- On/off controls - timed
- Complete cycle 24 hours
- 15 minute subdivision
- Analog Clock Display
- Operating voltage 100-230 V AC 50/60 Hz
- Degree of protection IPIP20
- Precision Synchronized with mains voltage
- DIN rail mounting
- Width 54 mm
- Height 92 mm
- Depth 66 mm